Trio Data Radios - Products

Product Training

Select your city from the list below or suggest a location:

 

New Products

telemetry and remote scada monitoring - trio data radios ER45e Ethernet Remote Data Radio

 

Be a Partner

Click here to be an International Partner of our company.

 

Contact Us

Click here to ask us a question using our Enquiry Form.

K Series: KR240 Advanced Spread Spectrum Industrial Data Radio

 

DOWNLOAD BROCHURE

Technical Specifications

Radio KR240
Frequency Range 2.4 to 2.4835GHz Region Specific Versions Available
Frequency Accuracy ±3.0ppm
Aging <= 1ppm/annum
Operational Modes Half Duplex, Psuedo Full Duplex
Configuration All configuration via Windows based software
Compliances(pending)

FCC PART 15
IC RSS 139 (RSS 210)
ACA AS1468-2003
ETSI EN 301 489, EN 300 328
ATEX Pending

Transmitter
Tx Power 0.01 - .5W (+27 dBm) 0.5 dB steps. User configurable with over-temperature.
Modulation 2 Level GFSK
Tx Keyup Time <50uS
Tx Spurious <= -50 dBc
Receiver
Selectivity Better than 50 dB
Intermodulation Better than 65
Spurious Response Better than 70 dB
Diagnostics (Optional)

Network wide operation from any remote terminal.
Non intrusive protocol – runs simultaneously with the application.
Over-the-air re-configuration of user parameters.
Storage of data error and channel occupancy statistics.
In-built Error Rate testing capabilities.

Connections
User Data Ports 2 in total - 1 x DB9 female port wired as DCE (modem) and 1 x RJ45
System Port RJ45 for diagnostic, configuration and re-programming
Antenna 2 x TNC female bulkhead. Separate connectors for LinkXtend™ or separate TX/RX antennas.
Power 2 pin locking, mating connector supplied
LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs (for both port A and B)
Modem
Data Serial Port A
Data Serial Port B
RS232 or RS485, RJ-45, 600-230,000 bps asynchronous
RS232, DCE, DB-9 300-38,400 bps asynchronous
System Port RS232, 19,200 bps asynchronous
Flow Control Selectable hardware or 3 wire interface
Encryption 256-bit AES encryption (Export restrictions may apply)
Collision Avoidance Trio’s unique ChannelShare™ collision avoidance system
Multistream™ Trio's unique simultaneous delivery of multiple data streams (protocols)
Firmware Local and over-the-air field upgradeable Flash memory
RF Channel Data Rate 32,000/64,000/128,000 or 256,000 bps
Bit Error Rate < 1x10-6 @ -108 dBm
General
Power Supply 10-30 Vdc (13.8 Vdc nominal)
Temp Range -40 to + 70oC
Transmit Current 800 mA nom @ 1W
Receive Current <100mA nom
Dimensions Rugged Diecast Enclosure 100 x 34 x 165mm (4.0 x 1.4 x 6.5 inches)
Weight 0.5kg (1.1lbs.)
Mounting Integrated Mounting Holes
Sleep Mode Software Controlled & External
Options
TVIEW+™ Configuration, Network Management and Diagnostic Windows GUI Software
DIAGS/K Network Management and Remote Diagnostics Option

 

Local regulatory conditions may determine performance and suitability of individual versions in different countries. It is the responsibility of the buyer to confirm these regulatory conditions. Performance data indicates typical values related to the described unit.

Information subject to change without notice.

NEXT: RANGE AND COVERAGE

Trio E-Series

 

Trio M-Series

 

Trio J-Series

 

Trio K-Series

 

Trio D-Series

 

Trio Datacom is Schneider Electric